+964 750 905 1010
info [at] helptechco [dot] com
in stock

  • All-in-one Punch down and wire trim process
  • Multi use E -Jacks (Keystones), can be used in E-Tool and also standard punch down tool
  • E -Tool can be used for either Cat6 Keystone E-Jacks
  • Jacks can be inserted either side of E-Too
  • 1305-04017

PowerMAX™ : Gigabit High Speed Ethernet

Cat 6 Horizontal Type Keystone ezi-Jack, T568A/ B, White

The DINTEK PowerMAX™ Category 6 solutions are guaranteed to exceed Class E channel specifications as set down in International standards.

If it’s speed that you’re after, then look no further than the DINTEK PowerMAX™ Category 6 Modular Jacks.

DINTEK Cat6 Jacks provide performance that exceeds category 6 connecting hardware performance specifications. They also ensure backwards compatibility with components and systems of lower performing categories. DINTEK Installers and end users benefit from the ease of install and use, and with their compact design they are good for high density situations. For example, up to six modules can be utilized in a single faceplate. Combined with other DINTEK PowerMAX™ products, they are the perfect solution to your voice and data communications needs.

A video demonstrating an ezi-Jack termination is available here:

Standards & Applications

Standards
  • UL Verified
  • ISO/IEC11801 2nd edition
  • ANSI/TIA Standard 568-C.2
  • CENELEC EN 50173
Applications
  • Voice; T1; ISDN
  • 10BASE-T (IEEE 802.3)
  • 16Mbps Token Ring (IEEE802.5)
  • 100VG-AnyLAN (IEEE802.12)
  • 100BASE-T Ethernet (IEEE802.3)
  • 155/622Mbps 1.2/2.4 Gbps ATM
  • 1000Mbps Gigabit Ethernet
  • 550MHz Broadband Video

1305-04017
/ /
Dintek
/
Features & Specifications
Features
  • Meet ANSI/TIA-568-C.2 Cat.6 15M Short Link requirements.
  • Accept 22~24AWG, stranded or solid wire
  • IDC connector with large space of each pair to improve crosstalk.
  • Modular jack meet FCC part 68
  • Wiring: T568A/B
Environmental Conditions
  • Temperature range:
           Storage: -40 to +700C
           Operational: -10 to +600C
  • Relative humidity (operational): max. non-condensing 93%
Electrical Characteristics
  • Electrical Insulation resistance: 500 mΩ min.@ 100V d.c
  • Dielectric with standing voltage: 1000 V d.c. or a.c. Peak Contact to
  • Contact @ 60 Hz for 1 MIN.
  • Spring Wire Contact resistance: 20 mΩ Max.
  • Voltage/Current rating:150VAC/1.5A
  • IDC Contact Resistance: 2.5 mΩ Max
Physical Characteristics
  • Housing: High-impact, Flame-Retardant Plastic, UL94V-0 rated,
  • Spring wire: Phosphor Bronze Alloy Plated with 50 micro-inch of Gold over 70~100 micro-inch of Nickel
  • IDC: Phosphor Bronze Alloy with 100 micro-inch 100% Sn Alloy
Mechanical Characteristics
  • Retention: 50N (11 Ibf) for 60s+-5s
  • Insertion/Extraction life: 750 cycles minimum.
  • Number of IDC terminations: 200 minimum.
1305-04017
/ /
Dintek
/
Top