The EAP-3660 is a smoke detector looking Wireless Access Point / Universal Repeater / WDS that operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and Super high speed of 802.11g (2.4GHz, 108Mbps) wireless standards. It's the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation.
EAP-3660 features high transmitted output power and high receivable sensitivity along with antenna diversity. High output power and high sensitivity can extend range and coverage to reduce the roaming between Access Points to get a more stable wireless connection. It also reduces the expense of equipment in the same environment.
To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. In addition, the User Isolation function can protect the private network between client users.
The attractive design, high performance, and array of features make EAP-3660 a suitable wireless solution for your residence or office.
Features | Benefits |
Super G solution up to 108Mbps | Capable of handling heavy data payloads such as MPEG, video streaming, large file transfer and VoIP |
High Output Power up to 28 dBm | Extended excellent Range and Coverage (fewer APs) |
IEEE 802.11b/g Compliant | Fully Interoperable with IEEE 802.11b/IEEE802.11g compliant devices |
Embedded Antenna | Users won’t see antenna in your building environment |
Point-to-point, Point-to-multipoint Wireless Connectivity | Let users transfer data between two buildings or multiple buildings |
WDS (Wireless Distributed System) | Make wireless AP and Bridge mode simultaneously as a wireless repeater |
Repeater | The easiest way to expand your wireless network's coverage |
Support Multi-SSID function (4 SSID) in AP mode | Allow clients to access different networks through a single access point and assign different policies and functions for each SSID by manager |
Antenna diversity support | Enhance the traffic signal |
WPA2/WPA/ IEEE 802.1x support | Powerful data security |
MAC address filtering in AP mode(up to 50) | Ensures secure network connection |
User isolation support (AP mode) | Protect the private network between client users. |
Power-over-Ethernet (IEEE802.3af) | Flexible Access Point locations and cost savings |
Keep personal setting | Keep the latest setting when firmware upgrade |
SNMP Remote Configuration Management | Help administrators to remotely configure or manage the Access Point easily. |
QoS (WMM) support | Enhance user performance and density |
Technical Specifications
Memory | 16MB SDRAM | |
Flash | 4MB | |
Physical Interface |
LAN: One 10/100 Fast Ethernet RJ-45 Reset Button Power Jack |
|
LEDs Status |
Power/ Status LAN (10/100Mbps) WLAN (Wireless Connection) |
|
Power Requirements |
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz (depends on different countries) Active Ethernet (Power over Ethernet, IEEE802.3af)- 48 VDC/0.375A Device: 12V/1A |
|
Regulation Certifications | FCC Part 15, ETSI 300/328/CE | |
RF Specification | ||
Frequency Band | 2.400~2.484 GHz | |
Media Access Protocol | Carrier sense multiple access with collision avoidance (CSMA/CA) | |
Modulation Technology |
OFDM: BPSK, QPSK, 16-QAM, 64-QAM DBPSK, DQPSK, CCK |
|
Operating Channels | 11 for North America, 14 for Japan, 13 for Europe | |
Receive Sensitivity (Typical) | IEEE802.11g | IEEE802.11b |
6Mbps@ -92dBm 54Mbps@ -74dBm |
1Mbps@ -97dBm 11Mbps@ -89dBm |
|
Available transmit power (The Max. Power will be different depending on local regulations) |
EEE802.11g | IEEE802.11b |
26dBm@6~24 Mbps 25dBm@36 Mbps 23dBm@48 Mbps 22dBm@54Mbps |
27dBm@1 ~ 11Mbps | |
Antenna |
Directional Embedded antenna (Diversity support) Antenna Gain = 4 dBi |