+964 750 905 1010
info [at] helptechco [dot] com
B2B
TP-Link (EAP225) AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point
TP-Link

  • 2.4GHz: 450Mbps, 5GHz: 867Mbps1
  • Free EAP Controller Software to easily manage hundreds of EAPs
  • Compatibility with 802.3af and Passive PoE
  • Captive Portal for guest authentication
  • MU-MIMO speeds up connections2
  • Airtime Fairness, Beamforming, and Band-Steering greatly improve the performance of connected devices
  • EAP225

AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point

Omada EAP225 V3
With AC1350 Wi-Fi and advanced MU-MIMO technology, the EAP225 V3 access point provides a long-range Wi-Fi coverage, perfect for small offices, campuses and the restaurant and hospitality industries. Efficient guest authentication with Facebook and SMS support simplify connectivity and boost your business. Compatibility with 802.3af and Passive PoE support makes deployment effortless and flexible.
​Layer 3 management capabilities combine with free EAP Controller software to allow IT staff to easily manage hundreds of EAPs across multiple sites.

Free EAP Controller Software

Free EAP Controller Software for Centralized Management makes it easy to set up and control hundreds of access points from a centralized location. There’s no added cost, and no need for special training.
​Easily monitor statistics, create a captive portal, manage traffic, map and run a free, customized site survey, upgrade and reboot your system and even scale your network.

Multiple PoE Options for Easy Installation

EAP225 V3 supports both 802.3af PoE and Passive PoE power supply, can be either powered by a PoE switch or the provided PoE adapter, making deployment effortless and flexible.

Efficient Guest Authentication with Facebook and SMS Support

Captive portal helps maintain only authorized guests to use the network, presenting devices with a convenient, user-friendly authentication method to grant Wi-Fi access. The addition of SMS and Facebook authentication simplifies the captive portal even further to simplify connectivity and boost your business.

Superior Wi-Fi Speeds with MU-MIMO

Outfitted with the latest 802.11ac Wave 2 MU-MIMO technology, the EAP225 V3 easily delivers dual-band Wi-Fi speeds of up to 1350 Mbps to multiple devices at the same time.

Advanced RF Technology

Band Steering automatically moves dual band devices onto the wider 5GHz band for faster connections.
Beamforming increases Wi-Fi range by creating highly targeted Wi-Fi connection and improves the system throughput.
Airtime Fairness gives equal amounts of airtime to each client ensuring everyone to achieve better network performance.

Limited Lifetime Warranty

Products with a limited lifetime warranty are covered at no expense to the original purchaser. Our team is here 24/7 to provide technical support at no additional cost.

EAP225
/
Networking Wired & Wireless Products Access Point
/
TP-Link
/
Download Datasheet

HARDWARE FEATURES

Interface Gigabit Ethernet (RJ-45) Port×1 (Support IEEE802.3af PoE and Passive PoE)
Physical Security Lock Yes
Button Reset
Power Supply • 802.3af/at PoE
• 24V Passive PoE (+4,5pins; -7,8pins. PoE Adapter Included)
Power Consumption • EU: 10.5 W
• US: 12.6 W
Dimensions ( W x D x H ) 8.1 × 7.1 × 1.5 in (205.5 × 181.5 × 37.1 mm)
Antenna Type 3 Internal Omni
• 2.4 GHz: 4 dBi
• 5 GHz: 5 dBi
Mounting Ceiling /Wall Mounting (Kits included)

WIRELESS FEATURES

Wireless Standards IEEE 802.11ac/n/g/b/a
Frequency 2.4 GHz and 5 GHz
Signal Rate • 5 GHz:Up to 867 Mbps
• 2.4 GHz:Up to 450 Mbps
Wireless Functions • Multiple SSIDs (Up to 16 SSIDs, 8 for each band)
• Enable/Disable Wireless Radio
• Automatic Channel Assignment
• Transmit Power Control (Adjust Transmit Power on dBm)
• QoS(WMM)
• Seamless Roaming*
• Omada Mesh*
• Band Steering
• Load Balance
• MU-MIMO
• Airtime Fairness
• Beamforming
• Rate Limit
• Reboot Schedule
• Wireless Schedule
• Wireless Statistics based on SSID/AP/Client
Wireless Security • Captive Portal Authentication*
• Access Control
• Wireless Mac Address Filtering
• Wireless Isolation Between Clients
• SSID to VLAN Mapping
• Rogue AP Detection
• 802.1X Support
Transmission Power • CE:
≤20 dBm(2.4 GHz, EIRP)
≤23 dBm(5 GHz, EIRP)
• FCC:
≤24 dBm(2.4 GHz)
≤22 dBm(5 GHz)

MANAGEMENT

Omada App Yes
Centralized Management • Omada Hardware Controller OC300
• Omada Hardware Controller OC200
• Omada Software Controller
• Omada Cloud-Based Controller (Supported by EAP225 V3.0, V4.0 and above, and is not supported by EAP225 V3.20)
Cloud Access Yes, through
• OC300
• OC200
• Omada Software Controller
• Omada Cloud-Based Controller (Supported by EAP225 V3.0, V4.0 and above, and is not supported by EAP225 V3.20)
Email Alerts Yes
LED ON/OFF Control Yes
Management MAC Access Control Yes
SNMP v1,v2c
System Logging Local/Remote Syslog Local/Remote Syslog
SSH Yes
Web-based Management HTTP/HTTPS
L3 Management Yes
Multi-site Management Yes
Management VLAN Yes
Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller (Supported by EAP225 V3.0, V4.0 and above, and is not supported by EAP225 V3.20)

OTHERS

Certification CE, FCC, RoHS
Package Contents • AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point EAP225
• Passive PoE Adapter
• Power Cord
• Mounting Kits
• Installation Guide
System Requirements Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows11, Linux
Environment • Operating Temperature: 0–40 ℃ (32–104 ℉)
• Storage Temperature: -40–70 ℃ (-40–158 ℉)
• Operating Humidity: 10–90% RH non-condensing
• Storage Humidity: 5–90% RH non-condensing
EAP225
/
Networking Wired & Wireless Products Access Point
/
TP-Link
/
Download Datasheet
Top