+964 750 905 1010
info [at] helptechco [dot] com
in stock
TE Platform (TE-OSC-24H) Optical Splice Closures
TE Platform

  • The protection grade reaches IP 68
  • Aerial and wall-mounting
  • Ambient temperature ranges from -40 to 65℃
  • The closure is of small volume, big capacity and convenient maintenance
  • The closure casing is made of quality engineering plastics, and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure
  • The mechanical structure is reliable and has the performance of resisting wild environment and intensive climate changes and serious working environment
  • TE-OSC-24H 

I.D.112500

Overview

TE-OSC-24H fiber optic splice closures (FOSC) are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. Applicable to situations such as overhead, man-well of pipeline, embedded situation etc.

Features

  • The protection grade reaches IP 68
  • Aerial and wall-mounting
  • Ambient temperature ranges from -40 to 65℃
  • The closure is of small volume, big capacity and convenient maintenance
  • The closure casing is made of quality engineering plastics, and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure
  • The mechanical structure is reliable and has the performance of resisting wild environment and intensive climate changes and serious working environment

Dimensions and Capacity

Outside Dimensions (L*W*H)
460 mm*182 mm*120 mm
Weight (excluding outside box)
2300 g - 2500 g
Number of Inlet / Outlet Ports
2 pieces on each side (total 4 pieces)
Diameter of Fiber Cable
Φ5 mm - Φ20 mm
Capacity of FOSC
Bunchy: 12 cores - 96 cores
Ribbon: up to 144 cores
The splice trays (FOST) inside the closure are turn-able like booklets, and have adequate curvature radius and space for winding optical fiber to make sure the curvature radius for optical winding 40 mm. Each optical cable and fiber can be operated individually.

TE-OSC-24H
/
Fiber Optic Optical Splice Closures
/
TE Platform
/
Download Datasheet

Dimensions and Capacity

Outside Dimensions (L*W*H) 460mm*182mm*120mm
Weight (excluding outside box) 2300g - 2500g
Number of Inlet / Outlet Ports 2 pieces on each side (total 4 pieces)
Diameter of Fiber Cable Φ5mm - Φ20mm
Capacity of FOSC Bunchy: 12 cores - 96 cores
Ribbon: up to 144 cores

Main Components

Name of Components Quantity Usage Remarks
Housing 1 set Protecting fiber cable splices in whole Internal diameter:
460*182*60(mm)
Earthing Deriving
Device		 1 set Deriving metallic components of fiber cable in the
FOSC for earthing connection		 Configuration as per requirement
Splice Tray (FOST) Max. 4 pieces (bunchy)
or 4 pieces (ribbon)		 Fixing heat shrink protective sleeve and holding fibers Bunchy: 12, 24 (cores)
Ribbon: 6 pieces
Foundation 1 set Fixing fiber cable, reinforced core and FOST N/A
Seal Fitting 1 set Sealing between FOSC cover and FOSC bottom N/A
Port Plug 6 pieces Sealing empty ports N/A

Main Accessories and Special Tools

Name of Components Quantity Usage Remarks
Heat Shrink Protective Sleeve N/A Protecting fiber splices Configuration as per capacity
Nylon Tie N/A Fixing fiber with protective coat Configuration as per capacity
Insulation Tape 1 roll Enlarging diameter of fiber cable for easy fixing N/A
Seal Tape 1 roll Enlarging diameter of fiber cable which fits in with seal
fitting		 Configuration as per specification
Hanging Hook 1 set For aerial use N/A
Earthing Wire 1 piece Putting through between earthing devices Configuration as per requirement
Abrasive Cloth 1 piece Scratching fiber cable N/A
Labeling Paper 1 piece Labeling fiber N/A
Special Wrench 3 piece Fixing bolts, tightening nut of reinforced core N/A
Desiccant 1 bag Put into FOSC before sealing for desiccating air Configuration as per requirement
Buffer Tube Customized Hitched to fibers and fixed with FOST, managing buffer Configuration as per requirement

Necessary Tools for Installation

Supplementary Materials (to be provided by operator)

Name of Materials Usage
Scotch Tape Labeling, temporarily fixing
Ethyl Alcohol Cleaning
Gauze Cleaning

Special Tools (to be provided by operator)

Name of Tools Usage
Fiber Cutter Cutting off fibers
Fiber Stripper Strip off protective coat of fiber cable
Combo Tools Assembling FOSC

Universal Tools (to be provided by operator)

Name of Tools Usage and Specification
Band tape Measuring fiber cable
Pipe cutter Cutting fiber cable
Electrical cutter Take off protective coat of fiber cable
Combination pliers Cutting off reinforced core
Screwdriver Crossing/Paralleling screwdriver
Scissor N/A
Waterproof cover Waterproof, dust-proof
Metal wrench Tightening nut of reinforced core

Shipping Information

Specification Carton Size Capacity Net Weight Remarks
Inner Box 475mm*195mm*127mm 1 pc 2.4kg - 2.6kg Configuration as per weight
Outer Box 615mm*480mm*410mm 9 pcs 21.6kg - 23.4kg Configuration as per weight
TE-OSC-24H
/
Fiber Optic Optical Splice Closures
/
TE Platform
/
Download Datasheet
Top