+964 750 905 1010
info [at] helptechco [dot] com
in stock

  • Interface: 1 x RJ45 STP Data In, 1 x RJ45 STP PoE Out, 1 Input power terminal block
  • PoE Budget: 54V DC / 95W PoE via 4-Pair
  • Standard: 802.3bt (Type 4)
  • Operating Temperature: -40 to 75°C
  • Ethernet Data Rate: 10/100/1000Mbps
  • End-Span/Mid-Span: End-Span + Mid-Span
  • IPOE-171-95W

Advanced Industrial 802.3bt Network Solution

PLANET IPOE-171-95W is a Single-Port, Industrial 802.3bt Power over Ethernet Injector with a maximum of up to 95 watts of power output over Ethernet cables.

It is designed specifically to meet the demand for growing higher power required network equipment such as:

  • Lighting
  • All-in-one touch PC
  • Remote digital signage display
  • Other network devices that need higher power to work normally

The IPOE-171-95W delivers the Ethernet digital data with 54V DC power over the twisted-pair cables as a 95-watt Power over Ethernet Injector, and the connected ultra Power over Ethernet splitter, the IPOE-171S, will separate the digital data and the power into three optional outputs (12V/24V DC) with distance up to 100 meters.

Convenient and Reliable Power System

To facilitate the 802.3bt PoE++ usage with commonly used 12~48V DC power input for transportation and industrial-level applications, the IPOE-171-95W adopts 12~48V DC to 54V power boost technology to solve power source issue but does not require special power supplies. The IPOE-171-95W provides an integrated power solution with a wide range of voltages (12~48V DC) for worldwide operability. It also provides dual-redundant, reversible polarity 12~48V DC power supply inputs for high availability applications.

95 watts of Power over 4-pair UTP

Instead of delivering power over 2-pair twisted UTP – be it end-span (Pins 1, 2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8), the IPOE-171-95W provides the capability to source up to 95 watts of power by using all the four pairs of standard Cat. 5e/Cat. 6 Ethernet cabling.

PoE Standard IEEE 802.3af
(802.3at Type 1)
IEEE 802.3at
(802.3at Type 2)
IEEE 802.3bt
(802.3bt Type 3)
IEEE 802.3bt
(802.3bt Type 4)
PoH
(Power over HD-BASE-T)
Maximum Power delivered by PSE 15.4 watts 30 watts 60 watts 95 watts 95 watts
Power Available at PD 12.95 watts 25.5 watts 51 watts 71 watts 72 watts
Voltage Range 48V 50~57V 50~57V 52~57V 52~57V
Twisted-pair Used 2-pair 4-pair 4-pair 4-pair
Supported Modes End-span or Mid-span End-span + Mid-span End-span + Mid-span End-span + Mid-span
Supported Cabling Cat. 3/5/5e/6 Cat. 5e/6 Cat. 5e/6 Cat. 5e/6

Intelligent LED Indicator for Power Input and Real-time PoE Usage

The IPOE-171-95W helps users to monitor the current status of power input and PoE power usage easily and efficiently via its advanced LED indication. “Power Input” allows user to know the status of power input. “PoE Power Usage” displayed on the panel of the IPOE-171-95W has three LED indicators of different power usages. Via the power usage LED, the IPOE-171-95W enables the administrator to monitor the status of the power usage of the connected PDs in real time.

High compatibility and Compact Size Design

It is easy to install the PoE injector by way of Plug and Play and comes with simple troubleshooting, making it easy for business and home users to own it. Besides, the IPOE-171-95W comes in compact housing, and provides two DC redundant power inputs, two power LEDs, fault LED and PoE-in-use LED. Two RJ45 ports -- Ethernet port and Ethernet + DC port – are on the front panel.
Moreover, the IPOE-171-95W, when switched to the legacy mode, provides power to those PD devices which do not fully follow the IEEE 802.3at/bt standard. It is helpful to enhance the compatibility of IPOE-171-95W with other PDs.
​Simply plug in the Ethernet cables and DC power wire, and the IPOE-171-95W is ready to provide high-speed network communication and the 802.3bt PoE injector functions simultaneously with no need of software configuration.

Quick and Easy Cabling Installation for PoE Network Deployment

Backward compatible with both 802.3at PoE standards, the IPOE-171-95W allows users to flexibly deploy standard and high powered devices to transfer data and power simultaneously through one Ethernet cable for up to 100 meters. The IPOE-171-95W frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time.

Stable Operating Performance under Difficult Environments

Today, the PoE demand expands from commercial applications to many critical networks in the harsh environment. The IPOE-171 series will be one of the ideal solutions that provide a high level of immunity against electromagnetic interference and heavy electrical surges typical of environments found on plant floors or in curb side traffic control cabinets. The IPOE-171 series can operate stably under temperature range from -40 to 75 degrees C which enables the users to conveniently apply the device in almost any location of the network. The IPOE-171 series is also equipped with a compact IP30 standard metal case that allows either DIN-rail or wall mounting for efficient use of cabinet space.

IPOE-171-95W
/ /
Planet
/
Hardware Specifications
Interface Input Port
1 x RJ45 STP
Data In
1 x RJ45 STP
PoE (Data + Power) Out
Input power terminal block
1
Network Cable Twisted-pair cable up to 100 meters (328ft)
10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6
100BASE-TX: 4-pair UTP Cat. 5, 5e, 6
1000BASE-T: 4-pair UTP Cat. 5e, 6
LED Indicators System:
Power 1 (Green)
Power 2 (Green)
Fault (Red)
PoE Port:
PoE-in-Use x 1 (Amber)
PoE Usage:
PoE Usage x 3 (Amber)
Data Rate 10/100/1000Mbps
Dimensions (W x D x H) 135 x 87.8 x 32 mm
Weight 470g
Power Requirements DC 12~48V, 5A max.
Unit Output Voltage DC 54V
Power Consumption 120 watts max.
No. of devices that can be powered 1
Installation DIN-rail kit or wall-mount ear
Alarm Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V
Enclosure IP30 slim type metal case
Power over Ethernet
PoE Standard IEEE 802.3at/bt PSE
PoE Power Output Budget DC 54V / 95-watt PoE via 4-pair
DC 54V / 36-watt PoE via 2-pair
PoE Power Output DC 24V~48V input:
Max. 89.5W@1m cable
Max. 75W@100m cable
DC 12V input:
Max. 60W@1m cable
Max. 52W@100m cable
PoE Power Supply Type End-span + Mid-span
Power Pin Assignment Pair 1 End-span: 1/2 (-), 3/6 (+)
Pair 2 Mid-span: 4/5 (+), 7/8 (-)
PoE Mode Standard: To provide power to the PD devices that follow the IEEE 802.3at/bt standard.
Legacy: To provide power to the PD devices that do not fully follow the IEEE 802.3af/at/bt standard. Besides, the Legacy mode supports PoH and Ultra PoE.
Standards Conformance
Standards Compliance IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3bt 4-pair Power over Ethernet Type 4
IEEE 802.3at Power over Ethernet Plus
Regulatory Compliance FCC Part 15 Class A, CE
Environment
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Operating Humidity 5 ~ 90%, relative humidity, non-condensing
Storage Humidity 5 ~ 90%, relative humidity, non-condensing
Standard Accessories
Package Contents IPOE-171-95W
User's manual
Wall-mount kit
Dust cap
IPOE-171-95W
/ /
Planet
/
Top